saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 1/7 4 5 6 1 23 1 23 65 4 features rf bandpass filter high attenuation no matching 50 single-ended operation ceramic surface mounted device (smd) package ( 3.0 mm * 3.0 mm ) rohs compliant package dimensions dimensions shown are nominal in millimeters body : al 2 o 3 ceramic lid : kovar, ni plated terminations : au plating 0.3 ~ 1.0 um, over a 1.27 ~ 8.89 um ni plating maximum ratings parameter unit minimum typical maximum operating temperature range 0 25 70 storage temperature range -30 25 85 power handling capability dbm - - 10 electrostatics sensitive device ( esd ) pin configuration 2 input 5 output 1, 3, 4, 6 case ground i 9307 g64
saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 2/7 preliminary specifications fc = 930 mhz notes : 1) all specifications are based on the matching s chematic shown below, measured by agilent network a nalyzer and full 2 port calibration. 2) electrical margin has been built into the design to account for the variations due to temperature d rift and manufacturing tolerances 3) all attenuation measurements are measured relati ve to insertion loss minimum typical maximum unit center frequency ( fc ) - 930 - mhz insertion loss ( 920 ~ 940 mhz ) insertion loss ( 925 ~ 938 mhz ) - - 2.7 1.5 3.0 2.5 db amplitude ripple ( 920 ~ 940 mhz ) amplitude ripple ( 925 ~ 938 mhz ) - - 1.5 0.8 2.0 1.5 db p-p vswr ( 920 ~ 940 mhz ) vswr ( 925 ~ 938 mhz ) - - 1.7 1.7 2.0 2.0 attenuation 0.3 ~ 890 mhz 970 ~ 2000 mhz 25 25 29 32 - - - - - db input/output impedance 50 ohms
saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 3/7 input 50 output 50 matching schematic ( actual matching values may vary due to pcb layout and parasitics ) marking configuration 1) i 2) 9307 3) 1) pad number 1 index 2) manufacturer name 3) marking number * ink or laser marking available
saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 4/7 typical performance ( at 25 )
saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 5/7 input / output vswr charts input / output smith charts
saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 6/7 packing specifications 1. reeling quantity : 3000 pcs / 13 reel ( or 1000 pc s / 7 reel ) 2. taping structure : the tape shall be wound around t he reel in the direction shown below. tape specification 1. leader part and vacant position specification 2. tensile strength of carrier tape 4.4n/mm width 3. top cover tape adhesion 1) pull off angle : 0~15 2) speed : 300mm/min 3) force : 20~70g reel reel reel reel top cover tape top cover tape top cover tape top cover tape carrier tape carrier tape carrier tape carrier tape end end end end start start start start tape running direction vacant 150mm min. component contained vacant 150mm min. leader part 250mm min. 0~15 degree top cover tape direction of pull carrier tape
saw bandpass filter F9307 part no. F9307 rev. date 2014-04-16 i t f co., ltd. 102-901, bucheon technopark 364, samjeong-dong, ojeong-gu, bucheon-city, gyounggi-do, korea 421-809 rev. as 01 7/7 carrier tape dimensions [unit : mm] part direction reel dimensions [unit : mm] a 3.40 0.1 b 3.40 0.1 c 7.25 0.1 d 1.70 0.1 e 12.00 0.1 f 8.00 0.1 tape running direction
|
